FEATURES:

• Identical size to the original screen.
  
• Zero lag/ghosting/tearing/flickering/light bleeding.
• Infinitely adjustable brightness (using OSD).
• Scan-line and pixel grid emulation (using OSD).
• Color Modes [True Color/IPS/Grey/DMG] (using OSD).
• Screen Position Adjust (using OSD).
• True Motion for transparency support (using OSD).

INCLUDED:

• 1x IPS LCD
• 1x PCB
  
• 1x  Button Ribbon
• 1x  Bracket
• 1x 40 or 32 Pin Ribbon

NOTES:

• To install the Game Boy Advance CleanScreen just remove the old screen and connect the CleanScreen. Optionally solder a handful of pads onto the board with no wires (if you use the optional wire-free kit) to enable the on screen menu. Install can be done in a matter of minutes.
• The CleanScreen can be installed without trimming anything, but to achieve a perfect seal with the frame, the plastic dimples should be trimmed and sanded down. This is fully optional, as the difference is extremely small to begin with, and is only recommended if you want to have it perfectly flush against the frame or use a dust-guard kit to ensure no dust can ever come between the screen and the lens.
• Use OEM or original size lens for this mod.
• Created by .

DOCUMENTATION

•  (R6 - OSD)
• (R6 - original shell with no cuts)
• (HHL)

WARNINGS:

• Test before installation! When you receive a backlight/LCD kit, you should to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.